Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Greensboro?
Spring replacement in Greensboro typically costs $180 – $340 per spring. Since torsion systems use a matched pair and both springs are almost always replaced together, most homeowners pay roughly double that for a pair. The written estimate we give you after we look at the door sets the final price, and the estimate itself is free.
If your door slammed down or you heard a loud bang from the garage, a spring has broken. That’s the most common reason people call us in Greensboro, and it’s also the repair you should never attempt yourself. Torsion springs hold enormous stored tension. A trained technician knows how to release that tension safely; a homeowner with a winding bar and a ladder is one slip away from a serious injury. This guide walks through what spring replacement costs in Greensboro in 2026, what moves the price up or down, and how to tell whether you’re being quoted fairly. Our technicians have up to 14 years of experience, and we diagnose the actual hardware on your door before we quote anything.
Key Takeaways
- Typical spring replacement in Greensboro: $180 – $340 per spring, so a matched pair usually lands near twice that.
- Springs are the most common failure on a residential door, and both springs in a pair should be replaced at the same time.
- Brand coverage includes LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we work on the door you have.
- Free estimates, upfront pricing, and a written quote that sets the final price.
- Call (855) 554-0021. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician out to look at the door.
Spring Replacement Cost Breakdown (2026)
Here’s what spring-related work typically runs in the Greensboro market. These are estimated ranges for 2026. Every job is quoted per job by written estimate.
| Line item | Typical estimated range |
|---|---|
| Spring replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair) | About twice the single-spring range |
| Spring repair (tension or adjustment) | $180 – $340 |
| Cable repair (often done with a spring) | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Panel replacement | $250 – $500 |
| Opener repair (if the opener was strained) | $120 – $320 |
| Full garage door repair (combined work) | $150 – $600 |
What drives a spring job toward the top of the range? Door weight is the big one. A heavy wood door or an insulated double-car door needs heavier-gauge springs, and those cost more than the springs on a basic single-car steel door. Accessibility matters too. A low-clearance garage or a door mounted tight to the ceiling slows the job down. And if the springs have been broken long enough that the opener has been dragging the door up on its own, you may find a stripped gear or a burned-out capacitor once we get in there, which is why the cable and opener lines show up in the estimates above. When you’re looking at a quote, ask what’s included. A fair quote names the spring, the labor, and anything else your specific door needs.
What Affects Spring Replacement Pricing in Greensboro
- Spring type. Torsion springs mounted on the header above the door are the standard on most Greensboro homes, and they’re what most quotes cover. Extension springs run along the tracks on older doors, and while they’re sometimes a bit cheaper to replace, they need safety cables to be safe, which can add a line to the bill.
- Door size and material. A double-car door needs a heavier spring set than a single. Steel, wood, and insulated aluminum doors all weigh differently, and the spring has to match the door. We size the spring to your door, not to whatever’s on the shelf.
- Whether both springs go. On a two-spring torsion system, the standard practice is to replace both at once. If one spring broke, the other is the same age and under the same load, so replacing one and leaving the other is often a short-lived fix. Expect the pair to run about double a single spring.
- Age of the door and its other parts. A door that’s been running on a broken spring for a while puts strain on cables, rollers, and the opener. If those need attention, the final estimate grows, but it’s better to know it up front than to have a second failure a month later.
- Access and clearance. A tight garage, a low ceiling, or a door mounted close to the wall all change how long the job takes. We’ll tell you before we start if your setup is going to affect the labor.
- Who does the work. A specialist who works on springs every week prices the job to do it right, on the actual hardware. That’s different from a generalist guessing at it. This is where the brand-agnostic approach pays off: we work on the door you have, whether that’s a Clopay, Amarr, Wayne Dalton, or anything else, and the recommendation follows what the door needs.
How to Save on Spring Replacement
There’s not a lot of room to knock down the base cost of a spring, because the parts and the labor are what they are. But a few things keep the total from climbing.
- Replace both springs at once. It sounds counterintuitive to spend more, but replacing a matched pair in one visit is cheaper than paying for two separate jobs when the second spring fails. The single biggest driver of an unexpected cost is treating a two-spring door as a one-spring problem.
- Deal with it when it breaks. A door that’s been forced up and down on a broken spring wears the cables and the opener faster. Catching it early keeps the repair in the spring range.
- Get a written estimate before work starts. The estimate is free and it sets the final price. That’s how we work, and it’s how you should expect any qualified shop to work.
- Ask what the quote covers. A clear quote naming the spring, the labor, and any related parts is easier to compare than a single number.
- Mention anything else that’s been acting up. A noisy roller, a door that hangs partway up, an opener that seems to strain. We can check it on the same visit and fold it into one estimate.
Free estimates are available. Call (855) 554-0021. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Repair vs. Spring Replacement: Which Costs Less?
Repair is cheaper than replacement when the spring is intact but out of adjustment, and it runs in the same $180 – $340 band as a spring replacement. In practice, though, most spring calls in Greensboro end in replacement. A spring that snaps is broken for good; it can’t be repaired. What can be adjusted is tension, balance, and the winding on a spring that hasn’t failed yet. If a technician tells you the spring just needs adjusting, that’s a real service and it’s priced accordingly. If the spring is snapped, replacement is the only fix, and the pair is usually the right call.
What Does a Spring Replacement Job Involve?
A spring replacement starts with a diagnosis. We look at the door, weigh it if needed, and identify the spring type and size. Then the old springs come off safely, the new ones go on, and the door is balanced and cycled to make sure it opens and closes smoothly. Because we work on so many brands, the technician checks the opener and the rest of the hardware in the same visit. If the opener took a beating while the spring was broken, a LiftMaster or Chamberlain unit gets the same attention a Craftsman or Genie system would. That full-scope approach means one visit covers the door, the spring, and the opener, and you don’t need a second call for a second problem. We explain what failed and what we did about it before we leave.
For a broader look at repairs across the door, see Tandem Garage Door Repair. If you’re in the city and want the full picture of what we handle locally, the Greensboro page covers it.
Frequently Asked Questions
How much does spring replacement cost in Greensboro?
Spring replacement in Greensboro typically costs $180 – $340 for one spring. A matched pair, which is standard on most torsion systems, usually costs about twice that because both springs are replaced together. The written estimate sets the final price. Call (855) 554-0021 for an exact quote; estimates are free.
Do I need to replace both springs or just the broken one?
On a two-spring door, both springs should be replaced at the same time in almost every case. The working spring is the same age and has carried the same load as the one that broke, so it’s likely to fail soon. Replacing the pair in one visit costs about double a single spring but saves a second service call. Call (855) 554-0021 to have a technician check the door and quote the pair.
Is it cheaper to repair a spring or replace it?
Repair is cheaper only when the spring is intact and just needs adjustment, and that runs in the same $180 – $340 range as replacement. A snapped spring can’t be repaired, so replacement is the only option. In most cases, the honest answer is replacement. Call (855) 554-0021 and a technician will tell you which one your door needs, with a free estimate.
Can you come today to look at a broken spring?
Same-day service is often available, and a broken spring is a job we take seriously. Call (855) 554-0021. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to look at it and quote the work.
Why is a spring replacement sometimes more than the base range?
Spring work goes above the base $180 – $340 range when the door is heavy, when both springs in a pair are replaced, or when a broken spring has strained cables, rollers, or the opener and those need attention too. Cables run $130 – $250 and opener repair $120 – $320, so a combined job can land higher. Call (855) 554-0021 for a free estimate that names every line.
Why Call a Specialist for a Spring Job
A torsion spring under tension is one of the most dangerous parts of a residential garage door. We won’t walk you through winding or releasing one yourself, and no qualified shop should. The right move is to have a trained technician handle it. Our team works across eight leading brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we’re familiar with the hardware on your door before we start. The approach is simple: diagnose the problem, quote it clearly, fix it once. If the opener needs attention too, we handle that on the same visit, so you’re not calling a second contractor for the second half of the job.
Get a Free Spring Replacement Estimate in Greensboro
If your spring has snapped or your door is acting up, don’t wait for the next failure. Call (855) 554-0021. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door. You’ll get a free estimate, honest upfront pricing, and a clear explanation of what the door needs. Our technicians have up to 14 years of experience, and we work on the door you have, whatever brand it is. Licensed and insured, with a reputation built on fixing it right the first time. Call today for your free estimate.
Pricing reflects the Greensboro market as of 2026. Tandem Garage Door Repair offers free estimates – call (855) 554-0021.
Written by the team at Tandem Garage Door Repair.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Nia Hampton"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Adam Gallagher"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Robert Doyle